SMC CXSM25-15 double cylinder Dual Rod Cylinder

SMC CXSM25-15 dual rod cylinder is a product in SMC's CXS series. The following is its detailed introduction:

characteristic

Compact structure with high output force: adopting a thin dual cylinder structure, it has high non rotational accuracy, can provide twice the output force, and has strong resistance to lateral loads.

Multi directional installation: The cylinder can be fixed in four directions with screws, and the position of the air source port can also be selected according to actual needs, making it easy to flexibly apply in different equipment and space layouts.

Buffer design: The front end is equipped with a collision pad, which can adjust the stroke of the cylinder and alleviate the impact. At the end of the cylinder stroke, an air buffer device is usually equipped to further reduce the impact and noise between the piston and the cylinder head, extending the service life of the cylinder.

High precision guidance: Equipped with ball bearings and sliding bearings as standard, it provides high-precision guidance for dual rod motion, effectively reducing the influence of lateral forces on piston rod motion, making the motion smoother and more accurate, suitable for occasions with high requirements for position accuracy.

Technical Parameter

Cylinder diameter: 25mm, which determines the output force of the cylinder.

Travel: 15mm, which is the maximum distance that the piston rod can extend and retract.

Action mode: Dual action, which controls the bi-directional movement of the piston through intake and exhaust.

Fluid used: air, and usually does not require lubrication with oil.

Pressure resistance test pressure: 1.05MPa, conduct pressure resistance test at this pressure to ensure the sealing and safety of the cylinder.

Maximum operating pressure: 0.7MPa, the maximum allowable pressure for the cylinder during normal operation.

Minimum operating pressure: 0.05MPa-0.15MPa, the minimum pressure required to ensure the normal operation of the cylinder.

Using piston speed: 30-600mm/s, the speed range of piston movement inside the cylinder.

Pipe connection diameter: M5 × 0.8 or Rc 1/8, used to connect gas pipes and achieve input of gas source.

Travel adjustment range: Compared to the standard travel, it can be fine tuned within the range of 0 to -5mm.

Environment and fluid temperature: -10 ℃ to+60 ℃ (without freezing).