SMC CXSM25-25 double cylinder Dual Rod Cylinder

SMC CXSM25-25 belongs to the CXS series double rod cylinder. The following is a detailed introduction about it:

characteristic

High precision guidance: using ball bearings and sliding bearings to ensure high-precision guidance of dual rod motion, it can effectively reduce the influence of lateral force on the cylinder, making the movement of the piston rod smoother and more accurate, suitable for applications such as picking and placing that require high positional accuracy.

Multi directional installation and workpiece installation surface: Installation can be carried out from three directions, making it convenient to flexibly arrange in different equipment structures and spatial layouts; At the same time, there are three surfaces available for installing workpieces, increasing the flexibility of use.

Air cushion design: Equipped with an air cushion device, it plays a buffering role at the end of the cylinder stroke, reducing the impact and noise between the piston and cylinder head, extending the service life of the cylinder, and the air cushion only has a minimal increase in the total length size.

Advantages of dual rod structure: The dual rod design allows the piston to have one rod at each end, which can move in both directions simultaneously, providing twice the output force of a single rod cylinder and ensuring balanced force throughout the entire stroke.

Adjustable travel: The travel has a certain degree of adjustability, and can be fine tuned within the range of 0-5mm on the basis of the standard travel to meet the precise requirements of different work tasks for the travel.

Technical Parameter

Cylinder diameter: 25mm, which determines the output force of the cylinder.

Travel: 25mm, which is the maximum distance that the piston rod can extend and retract.

Applicable fluid: air, and usually does not require lubrication with oil.

Pressure resistance test pressure: 1.05MPa, conduct pressure resistance test at this pressure to ensure the sealing and safety of the cylinder.

Maximum operating pressure: 0.7MPa, the maximum allowable pressure for the cylinder during normal operation.

Minimum operating pressure: 0.05MPa-0.15MPa, the minimum pressure required to ensure the normal operation of the cylinder.

Use piston speed: 30-300mm/s or 30-600mm/s, the speed range of piston movement in the cylinder.

Pipe connection diameter: M5 × 0.8 or Rc 1/8, used to connect gas pipes and achieve input of gas source.