SMC CXSM25-30 double cylinder Dual Rod Cylinder

SMC CXSM25-30 dual rod cylinder is a product in the CXS series. The following is its related introduction:

characteristic

High precision guidance: This series of cylinders usually use ball bearings and sliding bearings, which can ensure high-precision guidance for double rod motion, effectively reduce the influence of lateral forces on the cylinder, and make the piston rod motion smoother and more accurate. It is suitable for occasions with high requirements for position accuracy.

Multi directional installation and workpiece installation surface: The cylinder can be installed from three directions, making it easy to flexibly arrange in different equipment structures and spatial layouts; At the same time, there are three surfaces available for installing workpieces, increasing the flexibility of use.

Air cushion design: Equipped with an air cushion device, it plays a buffering role at the end of the cylinder stroke, reducing the impact and noise between the piston and cylinder head, extending the service life of the cylinder, and the air cushion only has a minimal increase in the total length size.

Advantages of dual rod structure: The dual rod design allows the piston to have one rod at each end, which can move in both directions simultaneously, providing twice the output force of a single rod cylinder and ensuring balanced force throughout the entire stroke.

Travel fine-tuning function: The travel has a certain adjustability. On the basis of the standard travel of 30mm, it can be fine tuned within the range of 0 to -5mm to meet the precise requirements of different work tasks for travel.

Technical Parameter

Cylinder diameter: 25mm, which determines the output force of the cylinder.

Travel: 30mm, which is the maximum distance that the piston rod can extend and retract.

Fluid used: air, and usually does not require lubrication with oil.

Pressure resistance test pressure: 1.05MPa, conduct pressure resistance test at this pressure to ensure the sealing and safety of the cylinder.

Maximum operating pressure: 0.7MPa, the maximum allowable pressure for the cylinder during normal operation.

Minimum operating pressure: 0.05MPa-0.15MPa, the minimum pressure required to ensure the normal operation of the cylinder.

Use piston speed: 30-300mm/s or 30-600mm/s, the speed range of piston movement inside the cylinder.