Bently Nevada 330180-90-CN 3300 XL 8mm probe Proximitor Sensor

Here are the specifications and key details for the Bently Nevada 330180-90-CN 3300 XL Series Proximitor Sensor, compiled from official documentation and supplier listings .

Product Overview

The 330180-90-CN is a 3300 XL Series 5/8 mm Proximitor Sensor. It is the signal conditioning part of an eddy current transducer system, designed to work with a compatible 8mm probe and extension cable to measure shaft vibration, displacement, and position in rotating machinery .

A key feature of this specific part number is the "-CN" suffix, which indicates it carries country-specific agency approvals for use in regulated industrial environments in China (NEPSI) .

Detailed Technical Specifications

The table below combines data from the official 3300 XL system specifications and supplier listings for the -CN variant .

Parameter Specification

Part Number 330180-90-CN 

Product Type 3300 XL Proximitor Sensor 

System Compatibility 3300 XL 8mm Proximity Transducer System 

System Length 9.0 meters (The -90 suffix indicates the total electrical length of the probe + extension cable) 

Input Compatibility Accepts one 3300-series 5mm, 3300 8mm, or 3300 XL 8mm Proximity Probe and Extension Cable .

Power Requirement -17.5 Vdc to -26 Vdc without barriers (max 12 mA consumption); -23 Vdc to -26 Vdc with barriers .

Output Signal -2 Vdc to -18 Vdc, proportional to the gap between the probe tip and the target surface .

Linear Range 2 mm (80 mils) .

Recommended Gap Setting -9 Vdc [approximately 1.27 mm (50 mils)] for radial vibration .

Frequency Response 0 to 10 kHz (-3 dB) .

Sensitivity Typical 7.87 V/mm (200 mV/mil) .

Operating Temperature Proximitor: -51°C to +100°C (-60°F to +212°F) . Probe: -51°C to +177°C .

Target Material Factory calibrated to AISI 4140 steel. Calibration to other materials available upon request .

Minimum Target Size 15.2 mm (0.6 in) diameter (flat target) .

Extension Cable Capacitance 69.9 pF/m (21.3 pF/ft) typical .

Field Wiring 0.2 to 1.5 mm² (16 to 24 AWG). Max 305 meters (1000 feet) between Proximitor and monitor .

Housing Material Stainless steel construction .

RFI/EMI Immunity Improved immunity satisfies CE mark approvals without special shielded conduit .

Approvals / Certification -CN = NEPSI (China) hazardous area approval .

Key Features

System Interchangeability: Supports complete interchangeability of 3300 XL series probes, extension cables, and Proximitor sensors without the need for individual matching or bench calibration .

Backward Compatibility: Electrically and physically interchangeable with non-XL 3300 series 5mm and 8mm components .

Flexible Mounting: Can be mounted on a high-density DIN rail or in a traditional panel mount configuration using the same 4-hole footprint as older designs. The mounting base provides electrical isolation .

Secure Connections: Features gold-plated ClickLoc™ connectors that provide a tactile "click" when properly seated, preventing loosening from vibration .

API 670 Compliance: The 3300 XL 8mm system fully complies with the American Petroleum Institute's API 670 Standard (4th Edition) .