METRIX ST5484E-121-0200-00 ST5484E Series Seismic Velocity Transmitter in stock

The METRIX ST5484E-121-0200-00 is a loop-powered seismic velocity transmitter from the trusted ST5484E Series. This model is specifically configured with a full-scale range of 1.0 in/sec (25.4 mm/s) True RMS, making it ideal for general-purpose vibration monitoring on rotating machinery. It combines a piezoelectric accelerometer, signal integrator, RMS detector, and 4-20 mA signal conditioner into a single robust housing for direct connection to PLCs, DCS, and SCADA systems .

Key Features

All-in-One Design: Integrates sensor and signal conditioner; no external hardware required .

Loop-Powered (2-Wire): Simplifies wiring and reduces installation costs .

True RMS Amplitude Detection: Provides accurate measurement of vibration energy .

Rugged Construction: Housed in durable 303 stainless steel .

Polarity Independent Wiring: Metrix patented IPT® technology allows for error-free connection .

Product Specifications (Model ST5484E-121-0200-00)

The ordering code for this specific model breaks down as follows :

Parameter Specification

Model ST5484E - Seismic Velocity 4-20 mA Transmitter

Full Scale Range (AAA) 121 - 1.0 in/sec (25.4 mm/s) True RMS

Housing & Stud (B) 0 - 303 SS Housing, ¼” NPT Stud

Certification (C) 2 - CSA (Explosion-proof & Intrinsically Safe)

Connection (D) 0 - 2-Wire Flying Leads (4-20 mA output only)

High-Pass Filter (E) 0 - 2 Hz (Standard)

Low-Pass Filter (F) 0 - 1500 Hz (Standard)

Detailed Technical Data

Output Signal: 4-20 mA (proportional to velocity) .

Supply Voltage: 11 – 30 VDC (24 VDC nominal). Independent polarity circuit allows connection without regard to polarity .

Frequency Response: Designed for machines running between 120 rpm and 6,000 rpm (2 Hz to 1,500 Hz standard filtering) .

Accuracy: ± 2.5% within the passband .

Amplitude Detection: True RMS .

Operating Temperature: -40°C to +100°C (-40°F to +212°F) .

Enclosure Rating: IP66 when installed with appropriate conduit elbow (flying leads version) .

Weight: Approx. 0.36 kg (0.8 lbs) .

Mounting: ¼” NPT Stud (integral) .

Applications

Pumps, compressors, and fans .

Motors and generators .

Rolling element bearing machinery .

General-purpose rotating equipment (120 to 6,000 rpm) .

This unit provides a simple, economical vibration monitoring solution by converting true RMS vibration velocity directly into a 4-20 mA signal for trend analysis and alarming .

SEO Keywords Used:

METRIX ST5484E-121-0200-00

ST5484E Series Seismic Velocity Transmitter

4-20 mA Vibration Transmitter

True RMS Velocity Transmitter

Metrix Vibration Sensor

In stock