METRIX ST5484E-151-132-00 ST5484E Series Seismic Velocity Transmitter in stock

The METRIX ST5484E-151-132-00 is a loop-powered seismic velocity transmitter designed for continuous vibration monitoring of rotating machinery. It integrates a piezoelectric accelerometer, signal integrator, RMS peak detector, and 4-20 mA signal conditioner into a single rugged housing that mounts directly on machine casings or bearing housings—eliminating the need for external signal conditioning equipment.

This model is part of the ST5484E Series, widely used in industrial applications such as pumps, compressors, fans, turbines, gearboxes, and motors with rotational speeds between 120 rpm and 6,000 rpm.

Key Features

All-in-One Design – Combines sensor, integrator, and 4-20 mA loop-powered transmitter in one package 

4-20 mA Output – Proportional to vibration velocity (RMS or peak), compatible with PLC, DCS, and SCADA systems 

Loop-Powered (2-Wire) – Simplifies wiring and reduces installation costs

Hazardous Area Approvals – Available with CSA, ATEX, IECEx, and INMETRO certifications for use in explosive environments 

Rugged Construction – Fully potted electronics with IP56 to IP67 ratings; optional 316L stainless steel housing for corrosive environments 

Polarity Insensitive Power – Metrix patented IPT® independent polarity diode bridge allows voltage connection without regard to polarity 

Optional Dynamic Signal Output – BUF output for portable data collectors and analyzers (4-wire version) 

Technical Specifications

Parameter Specification

Model ST5484E-151-132-00

Measurement Type Seismic velocity (integration of acceleration)

Supply Voltage 11 – 30 Vdc (24 Vdc nominal); loop-powered (2-wire) 

Output Signal 4-20 mA, proportional to vibration velocity 

Full Scale Range 1.0 in/sec (25.4 mm/s) true RMS (standard for this configuration) 

Frequency Response 10 – 1000 Hz (±3 dB); standard low-pass corner optional (230, 250, 500, 1000 Hz) 

Accuracy ±2.5% within passband; ±4% at corner frequencies 

Mounting Thread 1/4″-28 UNF or M8 (stud size varies by configuration) 

Housing Material 303 stainless steel (standard); 316 stainless steel available 

Electrical Connection Terminal block, MIL connector, or flying leads – verify with ordering code 

Operating Temperature -40°C to +85°C (-40°F to +185°F) 

Enclosure Rating IP56 to IP67 depending on connector type and installation 

Hazardous Area Certification CSA / NRTL / C (Class I, Div. 1, Groups C & D; Class II, Div. 1, Groups E, F, G); ATEX / IECEx available 

Circuit-to-Case Isolation 10 kΩ 

Maximum Loop Resistance 700 Ω (2-wire) 

Shock Limit 1000 g peak 

Vibration Limit 250 g peak 

Weight Approximately 0.36 kg (0.8 lb) 

Model Number Breakdown: ST5484E-151-132-00

The ST5484E ordering code follows this structure: ST5484E-AAA-BCD-EF.

For -151-132-00:

Position Code Meaning

AAA (Full Scale Range) 151 1.0 in/sec (25.4 mm/s) true RMS 

B (Mounting Stud) 1 1/2 x 20 UNF – 1/2″ stud 

C (Housing Material) 3 316 stainless steel (corrosion-resistant) 

D (Electrical Connection) 2 2-pin terminal block 

EF (Hazardous Area Certification) 00 Standard (non-certified) or specific approval – verify at order

*Note: Some sources indicate this model may include a 8200-002 conduit elbow for hazardous area installations .*

Applications

The ST5484E Series is ideal for general-purpose vibration monitoring on:

Pumps, compressors, and fans – Detect bearing wear, imbalance, and misalignment 

Motors and generators – Continuous protection for critical rotating equipment

Gearboxes – Early fault detection in transmission systems

Turbines – Reliable operation in power generation applications 

Oil & Gas, Chemical, and Petrochemical Plants – Hazardous area installations with proper certifications 

Installation & Accessories

Common accessories for the ST5484E Series:

Part Number Description

8200-001 Conduit elbow and reducer with terminal block (IP56) 

8200-002 Stainless steel conduit elbow 

MX2030 Series Extension cables and connectors 

Why Choose the METRIX ST5484E-151-132-00?

Direct 4-20 mA Integration – Simplifies connection to existing control systems without additional signal conditioners 

Proven Reliability – Trusted by maintenance engineers in demanding industrial environments worldwide

Cost-Effective Monitoring – Ideal for applications where a full stand-alone monitoring system is not justified 

In Stock Availability – Ready for immediate shipment

Ordering Information

Condition Details

Product Condition 100% New Original Package 

Availability In Stock 

Warranty 12 Months 

Shipping Express shipping available (FedEx, DHL, UPS) 

Keywords: METRIX ST5484E-151-132-00, seismic velocity transmitter, 4-20 mA vibration sensor, loop-powered vibration transmitter, ST5484E series, industrial vibration monitoring, rotating machinery protection, hazardous area vibration sensor, Metrix vibration transmitter, in stock