Bently Nevada 330130-080-00-05 Eddy Current Sensor System Extension Cable

Bently Nevada 330130-080-00-05 3300 XL Standard Extension Cable

Product Number: 330130-080-00-05

Brand: Bently Nevada (Baker Hughes)

Product Series: 3300 XL

Product Type: Eddy Current Sensor System Extension Cable / 3300 XL Standard Extension Cable

1. Hazardous Area Certifications (Option -05)

The -05 approval option provides ATEX, IECEx, and CSA certifications, making this cable suitable for installation in :

Zone 0/1 (ATEX) and Division 1 (CSA) classified locations

Petrochemical plants and refineries

Offshore platforms

Chemical processing facilities

Oil & gas operations

2. Standard Cable Construction (Option -00)

The -00 option indicates standard cable without stainless steel armor or connector protectors. This provides:

Lightweight and flexible design for easy routing (0.35 kg)

Cost-effective solution when additional mechanical protection is not required

FEP insulation for chemical and oil resistance

3. ClickLoc™ Locking Connector

The patented ClickLoc connector features :

Audible "click" upon proper mating, confirming secure locking

Vibration-resistant design for high-vibration environments

No special tools required for installation – finger tightening only

Corrosion-resistant, gold-plated contacts for reliable signal transmission

4. Signal Integrity

75Ω characteristic impedance with triaxial design minimizes electromagnetic interference (EMI)

Low capacitance (69.9 pF/m) ensures minimal signal degradation over 8.0-meter distance

Double shielding (braided + foil) provides >90 dB attenuation @ 1 MHz

Frequency response supports 0 to 10 kHz range

5. Complete Interchangeability – No Matching Required

As part of the 3300 XL system, this extension cable is fully interchangeable. No separate linearity matching or calibration is needed .

Backward Compatibility: The 3300 XL series is backward compatible with non-XL 3300 series 5mm and 8mm transducer system components .

6. Wide Temperature Operation

Designed for extreme environments, this cable operates reliably from -51°C to +177°C, with extended high-temperature options available up to +260°C .

System Integration & Length Matching Requirements

Critical Installation Note: The total system length (probe length + extension cable length) must match the Proximitor Sensor rating. Standard total lengths for 3300 XL systems are typically 5.0m or 9.0m .

For the 330130-080-00-05 cable :

Probe LengthExtension Cable LengthTotal System Length

1.0 meter8.0 meters9.0 meters

0.5 meter8.0 meters8.5 meters (verify compatibility)

The 8.0-meter cable is commonly paired with a 1.0-meter probe to achieve a 9.0-meter total system length. Verify compatibility with your specific Proximitor model before installation.

Optimal System Configuration

Target material: AISI 4140 steel (standard calibration)

Target gap: 1.27 mm (50 mils)

Output voltage range: -2 Vdc to -18 Vdc

Power supply: -24 Vdc typical