Woodward EM-300-HC gear motor actuator set controllers

There is a lack of public-available, detailed information specifically about Woodward EM-300-HC gear motor actuator set controllers. However, based on the general characteristics of Woodward's similar products, the following relevant information can be provided:

Function Features

Precise Control: It can accurately control the opening and closing of the gear motor, and realize proportional adjustment of the motor's output, which is suitable for applications that require precise control, such as the flow control of fluid pipelines in industrial production, and can stably control the flow and pressure of media.

Multiple Signal Interfaces: Usually, it will be equipped with a variety of signal interfaces, such as 4 - 20mA, 0 - 10V analog input and output interfaces, as well as digital communication interfaces like Modbus. This enables it to communicate and cooperate with other control devices, such as programmable logic controllers (PLCs) and distributed control systems (DCSs), facilitating the realization of integrated control of the entire system.

Status Monitoring and Feedback: It has the function of real - time monitoring of the operating status of the gear motor, and can detect parameters such as motor speed, torque, and temperature. At the same time, it can output the position or status signal of the actuator through the sensor, so that the upper - level control system can understand the operating status of the actuator at any time, which is convenient for fault diagnosis and system operation monitoring.

Protection Function: It has over - voltage, under - voltage, over - current, over - temperature and other protection functions to protect the safe operation of the gear motor and the actuator itself. When a fault occurs, it can automatically take protection measures, such as cutting off the power supply, to avoid equipment damage and ensure the safety of the production process.

Technical Parameters (Speculative)

Power Supply Voltage: According to the common situation of similar products, it may support power supply voltages such as AC 220V, 380V or DC 24V. The specific voltage range needs to be determined according to the actual product, and it usually has a certain voltage tolerance range, such as ±10% of the rated voltage.

Output Torque and Speed: The output torque is determined according to the specific model and application requirements, which can range from a few N·m to dozens of N·m or more, in order to meet the driving force requirements of different loads. The output speed can also be adjusted within a certain range, and some products can achieve stepless speed regulation.

Protection Level: In order to adapt to different working environments, its protection level may reach IP65 or higher, which has good dust - proof and waterproof performance, and can be used in outdoor or relatively harsh industrial environments.

Working Temperature Range: The general working temperature range is about - 20℃ to + 80℃, and some special - designed products can work in a wider temperature range, such as - 40℃ to + 200℃.