Hengstler AC58/1213EK.42USB absolute rotary encoders

Hengstler AC58/1213EK.42USB is an absolute rotary encoder from Hengstler. Here is the relevant information:

Electrical parameters:

Working voltage: usually DC 10-30V, with polarity protection function to prevent damage to the encoder due to reverse power connection.

Current consumption: less than 110mA (at 24V power supply), low power consumption, helps save energy and reduce heat.

Output signal: may be synchronous serial SSI signal, Gray code or binary output can be selected, compatible with a variety of controllers and receiving devices.

Output load capacity: ≤400 ohms, 200-250 ohms during standard operation, can drive a certain number of load devices.

Mechanical parameters:

Rotating shaft: may use a clamping synchronous integrated flange shaft, with a shaft diameter of 10mm, a length of 20mm, including a D-type plane, made of stainless steel, with good strength and wear resistance.

Allowable speed: up to 2400 rpm, which can meet the needs of most medium and low speed rotation application scenarios.

Protection level: The protection level can reach IP65 or higher, which can effectively prevent dust and water, and adapt to harsh industrial environments.

Resolution: This model encoder may have a higher resolution. If it is 12-bit resolution, the single-turn resolution can reach 2 to the 12th power, that is, 4096, which can provide accurate position feedback.

Working temperature: The working temperature range is generally - 40℃ to 85℃, and the storage temperature is also - 40℃ to 85℃. It can work stably in a wide temperature environment.

Other features: It may have a rotation direction setting function. When the level is low, the default is to increase the data clockwise facing the shaft, and when the level is high, it becomes counterclockwise data increase. It may also have a zero point positioning function. When it is short-touched with a high level, the current position can be set to the zero position.