SMC CXSM20-75 double cylinder Dual Rod Cylinder

SMC CXSM20-75 is a double-rod cylinder in the CXS series with a bore of 20mm and a stroke of 75mm. It is suitable for precision picking and placing. The following is a detailed introduction:

Technical parameters:

Action mode: double acting.

Pressure range: 0.05MPa to 0.7MPa.

Ambient temperature: -10℃ to 60℃.

Piston speed: 30 to 700mm/s.

Buffer form: rubber buffer.

Built-in magnetic ring: usually optional, convenient for installing magnetic switches for position detection.

Tube diameter: M5×0.8.

Bearing type: sliding bearing.

Non-rotational accuracy: ±0.1°.

Adjustable stroke range: 0 to -5mm.

Product features:

High-precision guide: The use of sliding bearings can provide high-precision guides, effectively reduce the swing and offset during the movement of the cylinder, and is suitable for occasions with high position accuracy requirements.

Flexible installation: It can be installed from 3 directions, and the workpiece can be installed on 3 surfaces, which is convenient for use in different equipment layouts and can adapt to various installation requirements.

Compact structure: The cylinder is compactly designed to save space and is suitable for installation in automation equipment with limited space.

Dimensions: The overall size is approximately 169×64×25mm, the length direction (including front and rear covers, etc.) is approximately 169mm, the width is 64mm, and the height is 25mm.