SMC CXSM25-45 double cylinder Dual Rod Cylinder

The SMC CXSM25-45 double rod double acting cylinder is a double rod cylinder with a guide rod produced by SMC company. The following is its related information:

Basic parameters

Cylinder diameter: 25mm, which determines the output force of the cylinder, slightly smaller than the output force of a 32mm cylinder diameter.

Travel: 45mm, the distance the piston moves inside the cylinder.

Action mode: Double acting, achieving bidirectional piston movement by alternately inputting compressed air into the two chambers of the cylinder.

Working pressure range: minimum 0.05MPa, maximum 0.7MPa, pressure test pressure 1.05MPa.

Speed: The piston speed is usually between 30-600mm/s and can be controlled by adjusting the intake flow rate.

Fluid usage: Clean, dry compressed air, no additional lubrication required.

Environment and fluid temperature: -10 ℃ to 60 ℃, avoid fluid freezing.

Interface specification: RC1/8 "pneumatic threaded interface is generally used, with 2 interfaces.

Structural characteristics

Built in magnet: convenient for installing magnetic switches, used to detect piston position, provide position feedback signals for automation control systems, and achieve precise control.

Guidance function: Using sliding bearings for guidance, equipped with guide rods and sliding bearings, effectively preventing the piston rod from swinging or rotating, ensuring the straightness and stability of motion, suitable for high-precision positioning occasions.

Rubber buffer: A rubber buffer device is installed at the end of the stroke to reduce piston impact, lower mechanical wear and noise, and extend cylinder life.

Multi directional installation: It can be installed from 3 directions, and the working components can be installed on 3 surfaces to adapt to different equipment layouts and space limitations.