SMC CXSM32-30 double cylinder Dual Rod Cylinder

The SMC CXSM32-30 double rod double acting cylinder belongs to the CXS series with guide rod double rod cylinder produced by SMC company. The following is its related introduction:

Basic parameters

Cylinder diameter: 32mm, determines the output force of the cylinder.

Travel: 30mm, which is the distance the piston moves inside the cylinder.

Action mode: Double acting, by alternately inputting compressed air into the two chambers of the cylinder, the piston can move in both directions.

Working pressure range: minimum 0.05MPa, maximum 0.7MPa, pressure test pressure 1.05MPa.

Speed: The piston speed is usually between 30-600mm/s.

Fluid usage: Clean, dry compressed air, no need for additional lubrication.

Environment and fluid temperature: -10 ℃ to 60 ℃, avoid fluid freezing.

Structural characteristics

Built in magnet: convenient for installing magnetic switches, used to detect piston position, provide signal feedback for automation control systems, and achieve precise control of cylinder movement.

Guidance function: Using sliding bearings for guidance, with guide rods and sliding bearings, it can effectively prevent the piston rod from swinging or rotating during movement, ensuring the straightness and stability of cylinder movement, suitable for occasions with high requirements for position control accuracy.

Rubber buffer: A rubber buffer device is installed at the end of the cylinder stroke to reduce the impact force when the piston reaches the end point, reduce mechanical wear and noise, and extend the service life of the cylinder.

Multi directional installation: It can be installed from 3 directions, and the working components can also be installed on 3 surfaces. The installation is flexible and convenient, suitable for different equipment and working conditions.