SMC CXSM32-40 double cylinder Dual Rod Cylinder

SMC CXSM32-40 Double Rod Double Acting Cylinder is a double rod cylinder with guide rod produced by SMC company. The following is its detailed introduction:

Basic parameters

Cylinder diameter: 32mm, which determines the output force of the cylinder. The larger the cylinder diameter, the greater the output force usually.

Travel: 40mm, which means the distance that the piston can move within the cylinder is 40mm.

Action mode: Double acting, by alternately inputting compressed air into the two chambers of the cylinder, the piston can move in two directions to complete the work task.

Working pressure range: The minimum working pressure is 0.05MPa, the maximum working pressure is 0.7MPa, and the pressure test pressure is 1.05MPa. In practical use, it is necessary to ensure that the working pressure is within the specified range to ensure the normal operation and safety of the cylinder.

Speed: The piston speed ranges from 30-600mm/s, and can be controlled by adjusting the intake flow rate and other methods according to specific application scenarios and process requirements.

Fluid usage: typically clean and dry compressed air, without the need for additional lubricating oil, making the cylinder cleaner and more environmentally friendly during use.

Environment and fluid temperature: The working environment temperature and fluid temperature range for use are -10 ℃ to 60 ℃. Attention should be paid to avoiding use in environments where the fluid may freeze, in order to avoid damaging the cylinder.