SMC CXSM32-60 double cylinder Dual Rod Cylinder

SMC CXSM32-60 CXS series cylinders are a double rod, double acting cylinder with guide rods. The following is a detailed introduction:

Basic parameters

Cylinder diameter: 32mm, determines the output force of the cylinder.

Travel: 60mm, refers to the distance that the cylinder piston can move.

Action mode: Double acting, by alternately inputting compressed air into the two chambers of the cylinder, the piston moves in two directions.

Speed: The piston speed is 30-600mm/s, which can be controlled by adjusting the intake flow rate according to actual needs.

Working pressure range: minimum working pressure of 0.05MPa, maximum working pressure of 0.7MPa, pressure test pressure of 1.05MPa.

Fluid used: Air (without oil), using clean, dry compressed air as a power source, without the need for additional lubricating oil.

Environment and fluid temperature: The working environment temperature and fluid temperature range are -10 ℃ to 60 ℃, but attention should be paid to avoiding fluid freezing.

Structural characteristics

Built in magnet: convenient for installing magnetic switches, used to detect piston position, achieve precise control of cylinder movement, and provide signals for automation control systems.

Guidance function: CXSM slide bearing is used for guidance, equipped with guide rods and sliding bearings. The high-precision guidance performance can effectively prevent the piston rod from swinging or rotating during movement, ensuring the straightness and stability of cylinder motion, and is suitable for occasions that require precise position control.

Rubber buffer: A rubber buffer device is installed at the end of the cylinder stroke to reduce the impact force when the piston reaches the end of the stroke, reduce mechanical wear and noise, and extend the service life of the cylinder.

Multi directional installation: It can be installed from 3 directions, and the working components can be installed on 3 surfaces, increasing the flexibility and convenience of installation, making it easy to use in different equipment and working conditions.

performance parameter 

Non rotational accuracy: ± 0.1 °, ensuring high-precision positioning of the cylinder during motion.

Travel adjustment range: 0 to -5mm, the travel can be fine tuned within a certain range to meet different work requirements.