Bently Nevada 330130-040-01-00 Eddy Current Sensor System Extension Cable

The Bently Nevada 330130-040-01-00 is a critical component of the 3300 XL series eddy current sensor system. This extension cable is specifically designed to connect the 3300 XL probe and proximitor, forming a complete vibration monitoring system that complies with API 670 standards .

As a standard extension cable in the 3300 XL series, this model features stainless steel armor (AISI 302 or 304 SST) with FEP insulation for enhanced durability in harsh industrial environments. The cable incorporates patented CableLoc™ technology, ensuring high tensile strength (up to 330 N) between the probe tip and extension cable connection, preventing signal interruption or loosening due to pulling during installation or maintenance .

Key differentiator from 330130-040-01-05: The -00 suffix indicates standard cable without special hazardous area certifications, making it suitable for general industrial environments where ATEX/IECEx approvals are not required.

Model Number Breakdown (330130-040-01-00)

Bently Nevada part numbers follow a strict coding structure. 330130-040-01-00 represents the following configuration:

Position Code Meaning

Base 330130 3300 XL standard extension cable (8mm system)

-040 040 Cable length of 4.0 meters (13.1 feet) – a popular standard length, typically used with 0.5m or 1.0m probes to achieve 5.0m or 8.0m total system length

-01 01 Armor option – stainless steel metal hose armor providing additional abrasion resistance, high-temperature protection, and mechanical damage resistance

-00 00 Certification option – Standard cable without hazardous area certifications (no ATEX/CSA/IECEx)

Key Technical Specifications

Specification Details

Manufacturer Bently Nevada (now part of Baker Hughes)

System Compatibility 3300 XL 8mm Eddy Current Probes & Proximitors

Cable Length 4.0 meters (approx. 13.1 feet)

Cable Type 75 ohm triaxial cable, FEP (Fluorinated Ethylene Propylene) insulation

Jacket/Armor Stainless steel AISI 302 or 304 SST (-01 option)

Connector Type Proprietary ClickLoc™ connectors on both ends (4-pin circular), gold-plated copper, corrosion-resistant

Operating Temperature -51°C to +177°C (-60°F to +350°F)

Minimum Bend Radius 25.4 mm (1 inch)

Weight Approximately 560g for 4m length

Tensile Strength ClickLoc connector locking force up to 330 N (75 lbf)

Ingress Protection IP67 (when mated)

Connector Protection Integrated connector protector seals against moisture, dirt, and mechanical stress