Allen-Bradley 1783-ETAP2F STRATIX 4000 3-PORT ENET/IP TA 2 FIBER

Allen-Bradley1783-ETAP2F STRATIX 4000 3-PORT ENET/IP TA 2 FIBER

Stratix Embedded switch. EtherNet/IP. 1 x copper port. 2 x fibre ports. LC connector. 24V DC.

Provides protection against the effects of moisture, corrosive gases/vapors, and fungal growth.

Modules will be exactly the same functionally and will utilize the same FW as the respective uncoated catalogs

The Allen-Bradley 1783-ETAP2F is an Ethernet I/P Switch used for industrial Ethernet I/P communication. This module has One (1) 10/100 Mbps, auto-negotiating copper port and Two (2) Fiber Optic interface that supports 100 Mbps in full duplex operation. This device support horizontal or vertical installation orientation using a standard DIN rail.

Specification of Allen-Bradley1783-ETAP2F

Depth 104.9 mm

Ethernet yes

Height 35.05 mm

IP-rating IP67

Manageable no

Mounting method DIN rail (top hat rail)

Number of combination-Ports RJ45/SFP 0

Number of module slots 1

Number of ports 10/100 Mbps RJ45 3

Number of ports 10/100/1000 Mbps RJ45 0

Number of ports PoE 0

Width 131.57 mm

1783 Stratix 4000 Series Industrial Ethernet Tap

The Allen-Bradley ETAP2F is an industrial Ethernet networking component that features One (1) Copper Ports and Two (2) Fiber Optic interfaces supporting 10/100 Mbps communication speed. It may also be used with encompass partner modules as well as non-Allen-Bradley and 3rd party products.

The single copper port of the 1783-ETAP2F is capable for 10/100 Mbps with auto-negotiating capability and supports operation in full or half duplex modes. The dual fiber optic ports of the 1783-ETAP2F is similarly capable of 10/100 Mbps communication speed with support for longer communication distance that exhibits increased susceptibility to noise and disturbances of electrical nature.