Sick Fiber-optic sensors WLL180T-L432

The parameter information of SICK WLL180T-L432 is as follows:

1. Electrical parameters

Supply voltage: 12V DC…24V DC (±10%)

Residual ripple: ≤10%

Current consumption: 50mA

Switching output: PNP

Number of switching outputs: 1

Switching type: light/dark switching, manually selectable

Output current: ≤100mA

Response time: ≤16μs, ≤70μs, ≤250μs, ≤2,000μs, ≤8,000μs optional

Switching frequency: 31.2kHz, 7.1kHz, 2kHz, 250Hz, 62.5Hz

Time function: no time delay, off delay, on delay, off delay and on delay, single

Delay time: programmable, 0ms…9,999ms

Input: Multifunctional input terminal MF

2. Mechanical parameters

Connection type: Cable 4-pin, 2m

Wire material: PVC

Wire cross section: 0.2mm2

Protection level: III

Weight: 25g

Housing material: Plastic, ABS/PC

Housing protection level: IP50

3. Environmental parameters

Operating ambient temperature: –25°C…+55°C

Storage ambient temperature: –40°C…+70°C

4. Optical parameters

Light type: Visible red light

Light source: Light-emitting diode

Wavelength: 650nm

5. Dimensional parameters

Dimensions (WxHxD): 10.5mmx34.6mmx71.9mm

6. Detection parameters

Maximum sensing range: 0m…20m (through-beam system)

Sensing range: 0mm…1,400mm (proximity system)