Yokogawa CA500-F1/TE Multi-Function Process Calibrator

The Yokogawa CA500-F1/TE Multi-Function Process Calibrator sources and measures DC voltage, DC current, RTD, TC, resistance, frequency and pulse signals. It corresponds to 17 types of TC and 14 types of RTD for sourcing. The reflective LCD has a wiring information function.

Achieves accuracy of 0.015% (DC current), 0.020% (resistance), and 0.3˚C (RTD)

Thermocouple generation using TC Mini Plug

Square Root Output

Two-Wire Transmitter Loop Check

The Yokogawa CA500-F1/TE Multi-Function Process Calibrator is a high-performance calibrator designed for use in multiple applications. The CA500 offers useful functions for field work and provides improved source and measurement accuracy, sufficient for calibrating field instruments with higher accuracy and confidence.

Applications of Yokogawa CA500-F1/TE

20 mA Simulate

The CA500 can be used as a transmitter simulator to perform a loop test. It sinks the set current from an external voltage source of instrumentation equipment.

Two-wire Transmitter Loop Check

DC mA signals can be measured by supplying power to the transmitter from a 24 V DC power supply (not included). DC mA signal measurement and zero-point check can be performed with an accuracy of 0.015% of reading.

TC Simulate

The CA500-F1/TE corresponds to 17 types of TC for sourcing. It achieves the high basic accuracy of 0.5°C (typical of type K), two times better than the previous model. Also, input/output testing is possible with a single CA500, as it can measure output signals.

RTD Simulate

The CA500 corresponds to 14 types of RTD for sourcing. It achieves the high basic accuracy of 0.3°C (typical of type Pt100), which enables it to operate a highly reliable test. Additionally, input and output testing of temperature transmitters is possible at the same time.

Pulse Simulate

The calibrator performs measurement of pulse signal integration from a flowmeter and generates a pulse to a receiver, such as integrating counter or pulse converter. Integration time can be set from 1 min to 60 min.