Honeywell CC-UDIR01 Digital Output Relay output module

CC-UDIR01 is a single channel relay input module for low voltage applications. Coil side of the relay interfaces with the field device and the contact side gets connected (COM & NO) to digital input channels of IO hardware. This module does not require external power to operate. Relay used in DIR modules are electromechanical type. 

CC-UDIR01 is a single channel relay input module for low voltage applications. Coil side of the relay interfaces with the field device and the contact side gets connected to DCS. This module does not require external power to operate.

More Models for your reference:

Universal Signal Conditioning Assembly (USCA) – CC-USCA01 is a back plane assembly which can accommodate 16 signal conditioning modules. Field side terminals of each channel is provided with integrated fuse and knife disconnect function. DCS side interface is provided through a single mass termination cable (MTC) which connects all 16 channels. CC-USCA01 is DIN rail mountable.

• Universal Pass Through Adapter (UPTA) – CC-UPTA01 is a single channel pass through module which allows direct connectivity between DCS field terminals (both live & return) and the field device. This module does not require external power to operate.

• Digital Input Relay Adapter (UDIR) - CC-UDIR01 is a single channel relay input module for low voltage applications. Coil side of the relay interfaces with the field device and the contact side gets connected to DCS. This module does not require external power to operate.

• Digital Output Relay Adapter (UDOR) - CC-UDOR01 is a single channel relay output module for low voltage applications. Contact side of the relay interfaces with the field device and the coil side gets connected to DCS. This module does not require external power to operate.

• LLI - Low Level Input Adapter(LLAI) - CC-ULLIO1 is a single channel low level analog input module which supports temperature measurement using TC or RTD Sensors. This module is suitable for the majority of process and control applications in thermal industries. This module does not require any external power to operate and mainly driven from the 4-20mA loop. This gets connected to Series C Analog Input (HART/NON HART) and UIO module connected to DCS.