ABB TU810V1 Compact MTU Module Terminal Block 3BSE013230R1 S800 I/O DCS Modules

ABB TU810V1 Compact MTU Module Terminal Block 3BSE013230R1 S800 I/O DCS Modules In Stock

The TU810/TU810V1 is a 16 channel 50 V compact module termination unit (MTU) for the S800 I/O. The MTU is a passive unit used for connection of the field wiring to the I/O modules. It also contains a part of the ModuleBus.

The MTU distributes the ModuleBus to the I/O module and to the next MTU. It also generates the correct address to the I/O module by shifting the outgoing position signals to the next MTU.

General Information of ABB TU810V1 3BSE013230R1

Product ID:3BSE013230R1

ABB Type Designation:TU810V1

Catalog Description:TU810V1 Compact MTU, 50V

Long Description:Compact Module Termination Unit 2x8 signal terminals.

Medium Description:Compact Module Termination Unit 2x8 signal terminals.

Product Type:Module_Termination_Unit

Ordering

HS Code:853690-- Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp-holders and other connectors, junction boxes), for a voltage not exceeding 1,000 volts; connectors for optical fibres, optical fibre bundles or cables.- Other apparatus

Customs Tariff Number:85369095

Dimensions

Product Net Depth / Length:64 mm

Product Net Height:170 mm

Product Net Width:58.5 mm

Product Net Weight:0.2 kg

Technical

Number of Input Channels:N/A

Number of Output Channels:N/A

Environmental

RoHS Status:Following EU Directive 2011/65/EU

WEEE Category:5. Small Equipment (No External Dimension More Than 50 cm)

Number of Batteries:0

Specification of ABB TU810V1 3BSE013230R1

Article number 3BSE013230R1

Type Compact

Connection Terminal block

Channels 16

Voltage 50 V

Mounting Both directions

Mounting detail Horizontal 55 ºC (131 °F)

Vertical 40 ºC (104 °F)

Use with I/O AI810, AI815, AI820, AI830, AI830A, AI835, AI835A, AI845, AO810, AO810V2, AO815, AO820, AO845, AO845A, DI810, DI811, DI814, DI830, DI831, DI840, DI880, DI885, DO810, DO814, DO815, DO840, DO880, DP820, DP840

Process connections 2 x 2 Process power, 5 x 2 Process power (0 V)

Single/redundant I/O Single

Detailed data

Maximum current per I/O channel 2A

Maximum current process connection 5A

Acceptable wire sizes Solid: 0.2 - 4 mm² Stranded: 0.2 - 2.5 mm², 24 - 12 AWG

Dielectric test voltage 500 V a.c.

Environment and certification of ABB TU810V1 3BSE013230R1

CE mark Yes

Electrical safety IEC 61131-2, UL 61010-1, UL 61010-2-201

Hazardous Location C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2

Marine certification ABS, BV, DNV-GL, LR

Protection rating IP20 according to IEC 60529

Corrosive atmosphere ISA-S71.04 G3

Climatic operating conditions 0 to +55 °C (Storage -40 to +70 °C), RH=5 to 95 % no condensation, IEC/EN 61131-2

Pollution degree Degree 2, IEC 60664-1

Mechanical operating conditions IEC/EN 61131-2

EMC EN 61000-6-4, EN 61000-6-2

Overvoltage categories IEC/EN 60664-1, EN 50178

Equipment class Class I according to IEC 61140; (earth protected)

RoHS compliance EN 50581:2012

WEEE compliance DIRECTIVE/2012/19/EU

Dimensions

Width 64 mm (2.52 in.) including connector,

58.5 mm (2.3 in.) edge to edge installed

Depth 64 mm (2.52 in.) including terminals

Height 170 mm (6.7 in.) including latch

Weight 0.17 kg (0.37 lbs)