Inovance Vplus-Pin MV33 Flat-Wire Motor for sale

**MV33 Series Vplus-Pin Flat Wire IE5 Ultra-High-Efficiency Low-Voltage Permanent Magnet Synchronous Motor**

**I. Features of MV33 Series Vplus-Pin Flat Wire IE5**:

- **Winding Structure**:

    - It features flat wire hairpin windings, and the slot fill factor of the stator is over 60%, which is higher than that of traditional round wire motors (about 40%). The ineffective part of the copper wire is short, and the resistance is small, thus reducing heat loss.

- **Magnetic Field System**:

    - The permanent magnets on the rotor provide a stable magnetic field, and no additional excitation current is required. The stator is fed with three-phase alternating current to generate a rotating magnetic field, achieving synchronous and stable operation.

- **Structural Design**:

    - It has a compact structure, and its volume is 20% - 40% smaller than that of IE3 motors at the same power. Motors with a power of 110kW and above have shaft current protection design.

**II. Advantages of MV33 Series Vplus-Pin Flat Wire IE5**:

- **Energy Efficiency**:

    - The efficiency in the 90% working area is higher than 90%, and the highest can reach IE6. Compared with IE5 motors, the loss is reduced by more than 20%, saving energy, reducing costs, and decreasing carbon emissions.

- **Performance**:

    - It has high power density, which means it can output high power in a small volume, facilitating equipment miniaturization. It has good dynamic performance, large starting torque, and is suitable for frequent start-stop operations. It has strong demagnetization resistance and stable performance and long service life under high temperature and heavy load.

- **Adaptability and Reliability**:

    - The bearings and structural parts comply with IEC/GB standards, which is convenient for replacement. It has a modular design, and optional accessories can be selected as required. It has passed multiple regional certifications.

**III. Model MV33 Series Vplus-Pin Flat Wire IE5**:

- The model is like MV33-XXX-YYY-ZZZ, where XXX represents power (such as 5kW, 10kW, etc.), YYY represents rotational speed (such as 1000rpm, etc.), ZZZ represents protection level or installation method (such as IP23, B3, etc.), and the suffix represents special configurations (such as -E for encoder, -F for forced air cooling). The naming rules of different manufacturers may vary, and users should select appropriate models by considering multiple factors.