Welcome to CW Green Tech Limited
info@cwlyautomation.com
86-136 6712 1125
Phases:1
Nominal input voltage Ui nom:1 x 100 … 240 VAC
Input voltage range:1 x 85 … 264 VAC; 120 … 300 VDC
Input voltage derating:-1.5 %/V (< 110 VAC)
Nominal mains frequency range:50 … 60 Hz; 0 Hz
Input current Ii:≤ 2.3 A (230 VAC; 20 ADC)
Inrush current:≤ 8 A (active power factor correction (PFC))
Power factor correction (PFC):Active
Mains failure hold-up time:≥ 25 ms (230 VAC)
Nominal output voltage Uo nom:24 VDC (SELV)
Output voltage range:22 … 29.5 VDC (adjustable)
Default setting:DC 24 V
Nominal output current Io nom:20 A (24 VDC)
Nominal output power:480W
Deviation:≤ 1 %
Residual ripple:≤ 70 mV (peak-to-peak)
Current limitation:1.1 x Io nom (typ.)
Overload behavior:TopBoost/PowerBoost/Constant current mode
PowerBoost:DC 30 A (4 s); DC 25 A (8 s)
TopBoost:80 ADC (25 ms)
Internal fuse:T 10 A / 250 VAC
Backup fusing (required):An external DC fuse is required for the DC input voltage.
Backup fusing (recommended):Circuit breaker: 6 A, 10 A, 16 A; Tripping characteristic: B or C
Isolation voltage (sec.-PE):0.7 kVDC
Protection class:I
Protection type:IP20; per EN 60529
Resistance to reverse feed:≤ 35 VDC
Overvoltage category:II
Pollution degree:2
Transient suppression (primary):Varistor
Short-circuit-protected:Yes
Open-circuit-proof:Yes
Parallel operation:Yes
Series operation:Yes
Width:97 mm / 3.819 inches
Height:171 mm / 6.732 inches
Depth from upper-edge of DIN-rail:187 mm / 7.362 inches
Note (dimensions):Height with connector
WAGO 787-834 EPSITRON PRO Power supply
WAGO 787-833 EPSITRON PRO Power supply
WAGO 787-783 Diode redundancy module
WAGO 787-722 EPSITRON ECO power supply
WAGO 787-732 EPSITRON ECO power supply
WAGO 787-712 EPSITRON ECO power supply
WAGO 787-1668 Electronic circuit breaker
WAGO 787-1664/000-004 Electronic circuit breaker
WAGO 787-1002 EPSITRON? COMPACT power supply
