MTL3013 repeater powder supply

MTL3013 repeater powder supply

The MTL3013 has the same basic function as the MTL3011 but incorporates two channels in one unit. It enables two safe-area loads to be controlled independently by proximity detectors or switches located in hazardous areas. The two input circuits are interconnected but fully floating, enabling two safe-area loads to be controlled by a single changeover switch if required. Each channel is provided with a phase reversal switch so that an alarm condition (output open) can be signalled for either state of the sensor. The status of each relay is indicated by an LED on top of the unit and an additional terminal block provides the four terminals needed for the connections from the two sets of relay contacts. If the application calls for line-fault detection, MTL3011 or MTL3014 units should be used instead.

Number of channels:Two, interconnected, fully floating

Voltage applied to sensor:7.0 to 8.5V dc from 970Ω

Phase reverse facility:Operations reversed by switches on top of unit

Power supply failure protection:Output circuits open if supply fails

Weight:170g

Related products of MTL3013 repeater powder supply

MTL3000

MTL3011

MTL3012

MTL3013

MTL3014

MTL3041

MTL3042

MTL3043

MTL3045

MTL3046B

MTL3052

MTL3054

MTL3058

MTL3059

MTL3071 

MTL3072 

MTL3073

MTL3081

MTL3099

MTL3992