MTL3014 repeater powder supply

MTL3014 repeater powder supply

The MTL3014 enables two safe-area loads to be controlled by a single proximity detector or switch located in a hazardous area. It is

ideal for applications where the switch status is to be fed to two separate systems, such as control and logging or control and

shutdown installations. The unit – a dual-output version of the MTL3011 – features two isolated relay outputs. Relay A reflects the

status of the hazardous-area sensor, and relay B is selected by a switch in the top of the unit to operate either in parallel with relay A,or independently to provide a line-fault output when the connections to the sensor go open or short circuit. The status of each relay is indicated by an LED in the top of the unit, and an additional terminal block is fitted on the safe-area side of the unit to accommodate the connections from the two sets of relay contacts. The output phase of relay A (and relay B when ‘slave’ mode is selected) can be reversed by a link to allow an alarm condition (output open) to be signalled for either state of the sensor. The outputs cannot be used as if they were changeover contacts from a relay.

Number of channels:One, fully floating

Voltage applied to sensor:7.7 to 9.0V dc from 1kΩ

Weight:170g

Related products of MTL3014 repeater powder supply

MTL3000

MTL3011

MTL3012

MTL3013

MTL3014

MTL3041

MTL3042

MTL3043

MTL3045

MTL3046B

MTL3052

MTL3054

MTL3058

MTL3059

MTL3071 

MTL3072 

MTL3073

MTL3081

MTL3099

MTL3992