Cisco SFP-10G-T-X module Cisco Transceiver Modules

Cisco SFP-10G-T-X module

The Cisco 10GBASE-T module (Figure 2) offers connectivity options at the following data rates: 100M/1G/10Gbps. It has the SFP+ form factor and an RJ-45 interface so that CAT5e/CAT6A/CAT7 cables can be used to connect to end points with embedded 10GBASE-T ports. They are suitable for distances up to 30 meters and offers a cost-effective way to connect within racks and across adjacent racks.

Cisco SFP-10G-T-X is a small form-factor pluggable (SFP+) module from Cisco, mainly used for 10GbE Ethernet connections and supports copper cable transmission. The following is a detailed introduction to its technical parameters:

Basic Information

Standard: Complies with IEEE 802.3an 10GBASE - T standard and is compatible with SFP+ MSA (Multi-Source Agreement).

Transmission rate: Supports data transmission rates up to 10 Gbps.

Transmission medium: Use CAT6a or CAT7 Ethernet copper cable.

Transmission distance: When using CAT6a cable, the maximum transmission distance can reach 100 meters; when using CAT7 cable, it can also maintain good performance at a similar distance.

Electrical characteristics

Power supply voltage: Typical value is 3.3V.

Power consumption: Maximum power consumption is usually around 3.5W.

Working environment

Working temperature: 0°C to 70°C.

Storage temperature: -40°C to 85°C.

Relative humidity: 5% to 95% (non-condensing).

Interface characteristics

Interface type: SFP+ interface.

Pin definition: Follow the standard SFP+ pin arrangement.

Management and monitoring

Digital diagnostic monitoring (DDM): Supports DDM function, which can monitor the module's temperature, power supply voltage, transmitted optical power (although it is a copper cable module here, it also follows the SFP+ standard monitoring framework), received signal strength indication (RSSI) and other parameters, making it convenient for network managers to grasp the working status and performance of the module in real time.

Compliance

Electromagnetic compatibility (EMC): Complies with EMC standards such as FCC Part 15 Class A and CE.

Safety standards: Complies with safety standards such as UL/cUL, TUV, and CB.