MEANWELL DRP-240-48 AC-DC industrial DIN rail power supplies

Here are the parameter details of the MEAN WELL DRP-240-48:

• Electrical Parameters

• Input Voltage: 85-264VAC @ 47-63Hz, or 120-370VDC.

• Input Current @ Full Load: 3.5A (115V) / 1.8A (230V).

• Output Voltage: Nominal 48VDC, with no adjustable range specified2.

• Output Current: 5A2.

• Power Rating: 240W2.

• Efficiency: 85%.

• Ripple & Noise: Not specifically mentioned in the available data, but typically within an acceptable range for this type of power supply.

• Physical Characteristics2

• Dimensions: 125.5mm (length) x 125.2mm (height) x 100mm (depth).

• Weight: 1.2kg.

• Output Connector Type: Screw terminal block.

• Mounting Method: DIN rail TS-35/7.5 or 15.

• Performance Parameters

• Operating Temperature Range: - 10°C to + 70°C.

• Storage Temperature Range: - 40°C to + 85°C (typical for this type of product, not specifically stated for DRP - 240 - 48).

• Operating Altitude: Up to 5000 meters (common specification for MEAN WELL power supplies, may also apply to this model).

• Protection Functions5

• Short - circuit Protection: Protects the power supply and connected devices from damage in case of a short circuit.

• Overload Protection: Protects within a certain range of the rated output power. It usually adopts hiccup mode and recovers automatically after the fault condition is removed.

• Over - voltage Protection: Protects the load from being damaged by excessive output voltage. The specific protection range is not clearly stated but is typically around a certain percentage above the nominal output voltage. It also adopts hiccup mode and recovers automatically.

• Over - temperature Protection: Activates when the internal temperature of the power supply is too high, preventing damage to components. It usually adopts hiccup mode and recovers automatically after the fault condition is removed.

• Certifications2: UL, cUL, TUV, CB, CE.