OMRON NX-AD2208 I/O System module in-and outputs

Here is the parameter information about the inputs and outputs of the OMRON NX-AD2208 I/O System module:

Input Type: Analog input.
Number of Input Channels: 8 channels.
Input Signal Range: It can typically accept a variety of analog input signal ranges, such as 0 - 10V DC, 0 - 20mA, or 4 - 20mA. This allows for compatibility with different types of analog sensors and devices.
Input Resolution: The input resolution is usually 12 - 16 bits, which means it can accurately measure and convert the analog input signals into digital values with a high level of precision. For example, a 16 - bit resolution allows for 65536 different levels of measurement within the input signal range.
Input Accuracy: The input accuracy is within a certain percentage of the full - scale range, typically around ±0.1% to ±0.5%. This ensures that the measured values are reliable and accurate for industrial control applications.
Input Impedance: The input impedance is relatively high, usually in the range of several hundred kilohms to several megohms, depending on the input signal type. This high input impedance helps to minimize the loading effect on the connected sensors or signal sources, ensuring that the input signals are accurately measured.
Sampling Rate: The sampling rate is the frequency at which the module samples the analog input signals. It can be adjustable in some cases, with typical values ranging from a few samples per second to several thousand samples per second, depending on the application requirements.

Output Type: This module is mainly an analog - to - digital conversion module, and its direct output is the digital representation of the input analog signals. There may not be traditional "outputs" in the sense of driving external devices. However, the converted digital data is output to the connected controller or other devices through the appropriate communication interface.
Output Data Format: The output data is usually in a binary format, represented as a 12 - bit or 16 - bit digital value depending on the resolution of the module. The data can be transferred in different formats, such as serial or parallel, depending on the communication protocol used.
Communication Interface: The module is equipped with a communication interface to transfer the converted digital data to the controller or other devices. Common interfaces include Ethernet, Profibus, or other industrial - standard communication protocols. The communication interface ensures fast and reliable data transfer between the module and the rest of the control system.