OMRON NX-ECC202 I/O System module in-and outputs

Here is the parameter information about the inputs and outputs of the OMRON NX - ECC202 I/O System module1:

General Specifications

• Protection: Cabinet - mounted type.

• Grounding Method: Grounded to 100 Ω or less.

• Operating Environment Temperature: 0 - 55°C.

• Operating Environment Humidity: 10% - 95% (no condensation or freezing).

• Air: Free of corrosive gases.

• Storage Environment Temperature: - 25 - 70°C (no condensation or freezing).

• Altitude: Below 2,000 m.

• Pollution Degree: Pollution degree 2 or lower, in line with JIS B3502 and IEC 61131 - 2.

EtherCAT Communication Specifications

• Number of Connectable NX Units: Up to 63 units.

• Transmit/Receive PDO Data Size: Input: Up to 1,024 bytes (including input data, status, and unused areas); Output: Up to 1,024 bytes (including output data and unused areas).

• Mailbox Data Size: Input: 256 bytes; Output: 256 bytes.

• Mailbox Function: Used for emergency messages, SDO requests, and SDO information.

• Refresh Modes: Free - running mode, I/O synchronous refresh mode, timestamp mode, and task - cycle - priority refresh mode.

• Node Address Setting Range: For the built - in EtherCAT port, when the settable node address range is 1 - 192, it can be set to 1 - 192 via switches and 1 - 192 via Sysmac Studio.

• I/O Jitter Performance: Input: Below 1 μs; Output: Below 1 μs.

• Communication Cycle: 125 - 10,000 μs, depending on the EtherCAT master specifications and unit configuration.

Power Supply Specifications

• Unit Power Supply Voltage: DC24V (DC20.4 - 28.8V).

• NX Unit Power Capacity: 10 W or less.

• NX Unit Power Efficiency: 70%.

• Insulation Method: No insulation between the NX unit power supply and the unit power supply terminal.

• Unwired Terminal Current Capacity: 4 A or less.

• I/O Power Supply Voltage: DC5 - 24V (DC4.5 - 28.8V).

• Maximum I/O Power Supply Current: 10 A.

• Power Terminal Current Capacity: 10 A or less.

• NX Unit Power Consumption: 1.25 W or less.

• I/O Power Supply Current Consumption: 10 mA or less at DC24V.

Electrical Characteristics

• Withstand Voltage: AC510V for 1 minute, leakage current: 5 mA or less (between closed - circuit).

• Insulation Resistance: 20 MΩ or more between closed - circuits at DC100V.