ABB CI871K01 Module 3BSE056767R1 PROFINET IO interface

CI871K01: Module with PROFINET IO interface, commonly used for feeder protection and control relays, used in power plant DCS monitoring system, intelligent flat tempering furnace system manufacturing and other fields.

ABB CI871K01 is a PROFINET IO communication interface module for AC 800M controllers. The following is its introduction, parameters, and relevant model information:

Product Introduction

The CI871K01 module realizes the connection between the AC 800M controller and the PROFINET IO network, enabling the AC 800M to perform data interaction and communication with other PROFINET IO devices, thus achieving distributed control and device interconnection in industrial automation systems. It is connected to the PROFINET IO network through Ethernet. The CI871 unit is powered by the processor unit through the CEX bus and does not require an additional external power supply.

Product Parameters

• Communication Protocol: PROFINET IO.

• Line Redundancy: Not supported.

• Module Redundancy: Supported.

• Hot - swap: Supported.

• Compatibility with HI Controllers: Supported.

• Number of Units on the CEX Bus: 12.

• Connector: RJ - 45 female (8 - pin).

• Dimensions: Net width 59mm, net depth/length 127.5mm, net height 186mm.

• Weight: 0.7kg.

• Input Voltage: 24V DC.

• Operating Environment Temperature: - 20℃ to 60℃.

• Data Transfer Rate: 100Mbps.

• Product ID: 3BSE056767R1.

• Environmental Standard: Complies with the EU Directive 2011/65/EU and meets the RoHS standard.

Model Information

CI871K01 is the model of this module, and its product number is 3BSE056767R1. In different product lists or documents, there may be some expressions similar to CI871A. In fact, they all belong to the CI871 series of modules, with similar basic functions and characteristics, mainly used to connect the AC800M controller to the PROFINET IO network. In addition, this module is usually used together with the TP867 backplane. The TP867 backplane has two RJ45 Ethernet connectors, but only the CH1 connector that supports 100Mbps is used for PROFINET IO connection.