Cisco Catalyst IE-4000-4S8P4G-E industrial Ethernet switch

Here is the parameter introduction of the Cisco Catalyst IE-4000-4S8P4G-E industrial Ethernet switch:

General Information

Device Type: Managed switch with 16 ports.

Enclosure Type: Din - rail mountable, suitable for industrial environments.

Subtype: Fast Ethernet.

Ports

Port Configuration: It has 4 SFP ports, 8 10/100 - Mbps RJ - 45 ports with PoE +, and 4 combo gigabit SFP ports. There is also 1 mini - USB Type B port and 1 console RJ - 45 port for management and configuration.

Capacity

Virtual Interfaces (VLANs): Supports up to 1000 VLANs.

IGMP Groups: Can handle 1000 IGMP groups.

MAC Address Table Size: The MAC address table can store 16K entries.

Routing and Management

Routing Protocol: Supports static IPv4 routing.

Remote Management Protocol: Supports SNMP 1, SNMP 2, RMON 2, RMON, Telnet, SNMP 3, HTTP, SSH, and CLI.

Authentication Method: Uses RADIUS and TACACS+ for user authentication.

Features

The switch supports NAT support, BootP support, trunking, VLAN support, IGMP snooping, syslog support, DiffServ support, MAC address filtering, broadcast storm control, IPv6 support, multicast storm control, unicast storm control, spanning tree protocol (STP) support, rapid spanning tree protocol (RSTP) support, multiple spanning tree protocol (MSTP) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QOS), DHCP server, dynamic ARP inspection (DAI), bidirectional forwarding detection (BFD), unidirectional link detection (UDLD), DHCP relay, port security, MAC address notification, remote switch port analyzer (RSPAN), NTP time synchronization, Class of Service (COS), Precision Time Protocol (PTP), IGMP filtering, PROFINET v2, IP source guard, Flex Link support, Resilient Ethernet Protocol (REP), smart - port technology, and parallel redundancy protocol (PRP).