Cisco Catalyst IE-4000-16GT4G-E industrial Ethernet switch

Here is a parameter introduction of the Cisco Catalyst IE-4000-16GT4G-E industrial Ethernet switch:

Port Configuration

Total Ports: It has a total of 20 ports.

Gigabit Ethernet Ports: There are 16 RJ - 45 ports, labeled as 16GT, which support 10/100/1000 Mbps Ethernet. These ports are used to connect various industrial devices.

Combo Ports: There are 4 combo ports, marked as 4G - E. Each combo port has one copper and one fiber physical port, but only one can be used at a time, providing flexible uplink options.

Switching Capacity

Bandwidth: It offers a non - blocking switching capacity of 20 Gbps, which can meet the high - speed data transmission requirements of industrial applications.

Forwarding Rate: It can achieve line - rate, low - latency forwarding, which means it can forward data packets at the full speed of the ports with minimal delay, thanks to advanced hardware assist features such as NAT and IEEE 1588.

Memory

Main Memory: It is equipped with 512 MB of DRAM, which is used for buffering and processing data packets.

Flash Memory: The switch has 128 - MB of onboard flash memory for storing the operating system and configuration files. Additionally, it comes with a 1 - GB SD card for data storage and expansion.

Power Supply

Input Voltage: It supports a wide range of input voltages, including 24 V DC, 48 V DC, 110 V DC, 220 V DC, 110 V AC, 220 V AC, and 240 V AC.

Power Consumption: The typical power consumption is about 40W.

Dimensions and Weight

Dimensions: The size of the switch is 155.4 x 155.4 x 129.2 mm, which is compact and suitable for installation in industrial control cabinets.

Weight: It weighs approximately 2.88 kg, which is convenient for installation and operation.

Environmental Adaptability

Temperature Range: It can work in a harsh environment with a temperature range of - 40 °C to 70 °C.

Anti - Vibration, Shock and Surge: The switch is designed to be resistant to vibration, shock, and surge, which can withstand the harsh industrial environment.

Noise Immunity: It has good noise immunity, which can effectively prevent electromagnetic interference and ensure the stability of data transmission.

Management and Protocols

Manageability: The switch is highly manageable, supporting management methods such as CLI, HTTP, RMON, RMON2, SNMP1, SNMP2, SNMP3, SSH, and Telnet.

Supported Protocols: It supports industrial - standard protocols such as Ethernet / IP (CIP), Profinet, and MRP (IEC 62439 - 2), which can be well - integrated with existing industrial automation systems.