Hirschmann SPIDER 1TX/1FX-SM EEC SPIDER series industrial Ethernet switches

Here is the parameter introduction of Hirschmann SPIDER 1TX/1FX-SM EEC in the SPIDER series of industrial Ethernet switches:

Port Configuration:

Port Types and Quantities: It is equipped with 1 x 10/100BASE-TX twisted-pair RJ45 port, which supports auto-crossing, auto-negotiation, and auto-polarity recognition. There is also 1 x 100BASE - FX single - mode fiber port with an SC interface.

Network Performance:

Switching Mode: It adopts the store - and - forward switching mode, suitable for Ethernet (10Mbit/s) and fast Ethernet (100Mbit/s) applications.

Network Scale: For single - mode fiber, it supports 9/125 - μm fiber with a 0 - 32.5 - km reach, a 16 - dB link budget at 1300nm, an attenuation of 0.4dB/km, and a 3 - dB reserve.

Power Supply Parameters:

Operating Voltage: The required DC power supply is 9.6V - 32V.

Current Consumption: The maximum current consumption is 130mA at 24V DC.

Power Consumption: The maximum power consumption is 3W at 24V DC.

Physical Characteristics:

Dimensions: The size is 25mm x 114mm x 79mm (W x H x D).

Weight: It weighs 105g.

Mounting Method: It can be installed on a 35 - mm DIN rail. The protection class is IP30.

Environmental Adaptability:

Operating Temperature: The operating temperature range is 0°C - 60°C, and the storage/transport temperature range is - 40°C - 70°C.

Relative Humidity: The relative humidity is 10% - 95% (non - condensing).

Reliability:

MTBF: The mean time between failures (MTBF) is 101.5 years, calculated according to MIL - HDBK - 217F.

Other Features:

LED Indicators: There are LEDs for power, link status, data, and data rate.

Connection: It has 1 plug - in terminal block, 3 - pin, without signal contacts.