Keyence CA-HF6400C/M Intuitive Vision System

Here is a technical specification introduction to the Keyence CA-HF6400C/M:

CA-HF6400C (Color Version)

Image Element: It adopts a color CMOS image sensor with square pixels and 88 - times high - speed reading. The unit cell size is 2.5 μm × 2.5 μm.

Valid Pixel Count: In the 64 - megapixel mode, it is 8192 (H) × 7808 (V); in the 41 - megapixel mode, it is 7168 (H) × 5768 (V); in the 21 - megapixel mode, it is 5104 (H) × 4092 (V).

Image Size: It is equivalent to 2 - inch (φ32 mm) in the 64 - megapixel mode. In the 41 - megapixel mode, it is equivalent to 4/3 - inch (φ23 mm), and in the 21 - megapixel mode, it is equivalent to 1 - inch (φ16 mm).

Scanning System: It is a progressive scanning system. In the 64 - megapixel mode, the scanning time is 59.2 ms (4 ch), 117.2 ms (2 ch), and 244.1 ms (1 ch); in the 41 - megapixel mode, it is 40.4 ms (4 ch), 74.7 ms (2 ch), and 160.0 ms (1 ch); in the 21 - megapixel mode, it is 28.9 ms (4 ch), 39.2 ms (2 ch), and 83.3 ms (1 ch).

Pixel Transfer Frequency: It is 1085 MHz, and the transfer system is digital serial transfer.

Electronic Shutter: It can be set to 0.05 to 9000 msec by specifying numerical inputs such as 1/15, 1/30, 1/60, 1/120, 1/240, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, and 1/20000.

Lens Mount: It has a special mount (M40 P0.75). C - mount lenses can be used by replacing the lens mount on the camera with a C - mount adapter (OP - 88578; sold separately), but the 64 - megapixel mode will not be supported.

Environmental Resistance: The ambient temperature range is 0 to + 40 °C, and the relative humidity is 35 to 85% RH.

Weight: It weighs approximately 350 g (excluding the lens).

CA-HF6400M (Monochrome Version)

The technical specifications of the CA-HF6400M are similar to those of the CA - HF6400C, except that it uses a monochrome CMOS image sensor. Here are the main differences:

Image Element: It is a monochrome CMOS image sensor with square pixels and 88 - times high - speed reading. The unit cell size is 2.5 μm × 2.5 μm.

Color: It is a monochrome camera, which is suitable for applications that do not require color information, such as some industrial inspection scenarios where only grayscale images are needed for analysis.