Danfoss FC-360H30KT4E20H2 FC360 VLT AutomationDrive frequency converters

Here is a simple parameter introduction to the Danfoss FC-360H30KT4E20H2:

Power Rating: The rated power is 30kW, suitable for driving medium-to-large - sized motors in industrial applications.

Voltage Class: It belongs to the T4 voltage class, and the three - phase input voltage range is 380 - 480V AC.

Enclosure Type and Protection Class: With the E20 enclosure type and H2 protection class, it has IP20 protection, which can resist dust, small particles, and limited water splash, suitable for harsh industrial environments.

Rated Current: The rated current is approximately 60A, which is the maximum continuous current that the frequency converter can supply to the motor under normal operating conditions.

Control Mode: It usually adopts advanced control algorithms such as vector control or direct torque control to achieve precise control of motor speed and torque.

Frequency Range: The frequency range is 0 - 500Hz, allowing for flexible adjustment of the motor speed to meet the specific requirements of different applications.

Built - in Features: It is equipped with features such as a PID controller, EMC filter, and brake chopper (up to 22kW), which enhance its functionality and performance.

Communication Interfaces: It has communication interfaces like Modbus, Profibus, or Ethernet, facilitating seamless integration with other devices in an industrial automation system.

Cooling Method: The forced - air cooling method is used, and the frequency converter can operate at high temperatures up to 55°C without significant performance degradation.

Dimensions and Weight: The overall dimensions are approximately 300mm in height, 260mm in width, and 160mm in depth, and the weight is about 10 - 15kg. (The specific dimensions and weight may vary depending on the actual model and configuration).