Danfoss FC102P110T4E21H2XGX AutomationDrive frequency converters

Here is the technical parameter introduction of Danfoss FC102P110T4E21H2XGX:

Power Parameters

The rated power of this drive is 110 kW, which is suitable for medium - power applications.

It is designed for a three - phase power supply with a rated voltage of 400 - 480 V. The rated current is 210 A at 480 V, ensuring stable power output within the specified voltage range.

Control Technology

It adopts the advanced EC + intelligent VVC + control principle, which is well - suited for permanent - magnet motors and synchronous reluctance motors. This control method enables precise speed and torque control, enhancing the overall performance and efficiency of the motor - drive system.

The drive supports AMA (Adaptive Motor Application) and AEO (Adaptive Energy Optimization) functions. AMA optimizes motor control algorithms according to the actual operating conditions of the motor, while AEO continuously adjusts the motor's magnetization state to improve energy efficiency. Under non - full - load conditions, energy savings of 5 - 15% can be achieved.

Enclosure and Protection

The enclosure of the Danfoss FC102P110T4E21H2XGX has a protection level of IP55/NEMA 12. This high - level protection provides reliable protection against dust, water splashes, and other external factors, making it suitable for use in harsh industrial environments.

Built - in Functions

PID Controller: It is equipped with 4 auto - tuned PID controllers, which can quickly and accurately regulate the process variables such as temperature, pressure, and flow in industrial control systems. These controllers can be easily configured and adjusted to meet different control requirements.

Fire - control Mode: In the event of a fire, the drive enters the fire - control mode. It will ignore normal control signals, warnings, and alarms to ensure the continuous operation of the HVAC system, providing necessary ventilation and smoke extraction functions to help with emergency evacuation.

Dry - pump Detection: The drive is capable of detecting the dry - running condition of the pump by monitoring the relevant parameters such as pressure and flow. When a dry - pump situation is detected, the drive will take appropriate measures to prevent damage to the pump, thereby prolonging the service life of the pump.

Constant - torque Function: This drive can provide constant - torque output, which is particularly useful in applications where a stable torque is required, such as in conveyor systems, cranes, and some industrial pumping applications.

Flow Compensation: By integrating with external sensors installed near the outlet of fans or pumps, the drive can perform flow compensation. This function optimizes the flow rate according to the actual demand, resulting in energy savings and reduced installation costs.

Sleep Mode: The drive can automatically detect low - flow or no - flow conditions in the system. When such conditions are detected, it will increase the system pressure for a short period and then enter a sleep state to save energy. When the pressure drops below the set lower limit, the drive will automatically restart to ensure the normal operation of the system.

Communication Capabilities

The standard built - in communication protocols include FC protocol and Modbus RTU. These protocols allow for seamless communication and integration with other devices and systems in the industrial automation network, enabling remote monitoring and control of the drive.

Optionally, the drive can support a variety of other communication protocols, such as VLT® LonWorks MCA 108, VLT® BACnet/IP MCA 125, VLT® BACnet MCA 109, VLT® DeviceNet MCA 104, and VLT® PROFIBUS DP MCA 101. This wide range of communication options makes it highly compatible with different building management systems and industrial control platforms.

I/O Interfaces

Digital Input: There are 6 programmable digital inputs, which can be configured as PNP or NPN logic with a voltage level of 0 - 24 VDC. Two of these digital inputs can also be used as digital outputs, providing flexible options for interfacing with other digital devices and controllers.

Analog Input: The drive is equipped with 2 analog inputs that can be configured to accept voltage or current signals. The voltage input range is 0 - 10 V (adjustable), and the current input range is 0/4 - 20 mA (adjustable), allowing for easy connection to various analog sensors and control devices.

Analog Output: There is 1 programmable analog output with a current range of 0/4 - 20 mA. This analog output can be used to provide control signals to other devices, such as adjusting the speed of a motor or the position of a valve.

Relay Output: The drive features 2 programmable relay outputs, with specifications of 240 VAC, 2 A and 400 VAC, 2 A. These relay outputs can be used to control the on - off of external equipment, such as starting or stopping pumps, fans, or other electrical devices.