Welcome to CW Green Tech Limited
info@cwlyautomation.com
86-136 6712 1125
The key task of external gear pumps is to convert mechanical energy (torque and rotational speed) into hydraulic energy (flow and pressure). To avoid unnecessarily high heat losses, units with high efficiencies are sought after. These are realized by means of pressure-dependent gap sealing and high-precision manufacturing technology.
Consistent high quality based on large-volume production
Drive shafts according to ISO or SAE and customer specific solutions
Long service life
Slide bearings for high loads
Port connections: flanged or threaded
Max. flow [l/min]:47.0
Nominal size [cm³/rev]:22.5
Max. intermittent pressure [bar]:210
Maximum rotational speed [rpm]:2090
Drive shaft:Conical 1:5
Direction of rotation:Counter clockwise rotation
Front cover:2-bolt mounting Dia. 50 mm (K H D)
Housing material:Aluminum
Noise level:Standard noise level
Customer part number:0510715306
Product:External Gear Unit
Function:Pump
Model:Model F (4 ... 28 cm³/rev)
Series:Bearing diameter 18mm
Version:Corrosion resistant, pinned
Port connection:Square flange to fitting ISO 8434-1
Sealing material:NBR, shaft seal in FKM
Rear cover:Standard (cast iron)
Non-standard version:Deviations from catalogue standards, see drawing
Weight [kg]:3.34
Bosch Rexroth 0510325006
Bosch Rexroth 0510525009
Bosch Rexroth 0510525075
Bosch Rexroth 0510545002
Bosch Rexroth 0510566001
Bosch Rexroth 0510625022
Bosch Rexroth 0510625055
Bosch Rexroth 0510715306
Bosch Rexroth 0510825039
Bosch Rexroth 0517225001
