NOTIFIER FMM-101 Intelligent Monitor Modules Fire Alarm Peripheral Devices

Here is an introduction to the NOTIFIER FMM-101 Intelligent Monitor Module:

Overview

The NOTIFIER FMM-101 is an intelligent addressable mini - monitor module designed for use in intelligent two - wire systems. It is functionally similar to the FMM - 1 monitor module but comes in a smaller package, allowing it to be mounted directly in the electrical box of the device being monitored.

Features

Compact Design: It measures just 1.3″ (3.302 cm) in height, 2.75″ (6.985 cm) in width, and 0.65″ (1.651 cm) in depth. Its small size and light weight enable installation in a single - gang junction box directly behind the monitored unit without the need for rigid mounting.

Addressable Function: The individual address of each module is selected using built - in rotary switches. It can be set to addresses 01 - 159 on flashscan loops or 01 - 99 on clip loops.

Diverse Circuit Monitoring: It provides either a two - wire or four - wire fault - tolerant initiating device circuit (IDC) for normally - open - contact fire alarm and supervisory devices, or either normally - open or normally - closed security devices. It is used to monitor a single device or a zone of four - wire smoke detectors, manual fire alarm pull stations, waterflow devices, or other normally - open dry - contact devices. It can also be used to monitor normally - open supervisory devices with a special supervisory indication at the control panel.

Built - in Identification: It has built - in type identification, which automatically identifies this device as a monitor module to the panel.

Reliable Communication: It has high noise (EMF/RFI) immunity, ensuring reliable communication.

Power Supply: It is powered directly by the two - wire SLC loop, eliminating the need for additional power.

Status Indication: The module is equipped with a panel - controlled LED. The LED flashes green during normal operation (this is a programmable option) and latches on steady red to indicate an alarm.

Applications

The FMM-101 is suitable for a variety of applications in fire alarm and security systems. It is commonly used in intelligent two - wire fire alarm systems to monitor the status of dry - contact input devices, such as conventional heat detectors, manual call points, and waterflow switches. It can also monitor and power a circuit of two - wire smoke detectors. In addition, it can be used in security systems to monitor the status of various security - related devices with normally - open or normally - closed contacts.