Raycus RFL-C12000HP HP-Series CW Fiber Lasers

Raycus RFL-C12000HP is a 12000W continuous fiber laser in the Raycus Laser HP series, with the following features:

Performance Advantages

High cutting efficiency: Known as the "cutting god of war", it is a sharp tool for cutting medium and thin plates. Under full power, compared with the 12000W laser of a friendly company, the average speed of cutting 3-10mm common plates can be increased by more than 40%, and the efficiency of cutting 6mm carbon steel can be increased by up to 85%; the cutting capacity is equivalent to that of a 20000W laser, and the speed is further improved when cutting 6mm stainless steel and carbon steel.

Low processing cost: When using it to process stainless steel and carbon steel with a thickness of 3-10mm, the efficiency is improved while the cost is significantly reduced, up to more than 50%.

Good stability: The power instability is ≤±1.5%, with higher power stability, which can ensure the stability of the cutting process. At the same time, it has multiple anti-high-reflection mechanisms, has higher anti-reflection ability, and can adapt to different processing scenarios.

High degree of intelligence: With visible light, feedback light and leakage light monitoring signals, it can monitor the laser status in real time, which is convenient for timely discovery and solution of problems.

High safety standards: It meets the requirements of mainstream electrical safety certification such as CE and PLD, and is more reliable and safe to use.

High electro-optical conversion efficiency: The electro-optical conversion efficiency is greater than 40%, which can effectively reduce energy consumption and save use costs.

Output characteristics: The central wavelength is 1075-1085nm, the modulation frequency is 2kHz, the output fiber diameter is 200μm, the fiber length is 20m, and the polarization state is random.

Electrical and mechanical characteristics: The input power is 340-420V, the heat is dissipated by water cooling, the operating temperature is 10-40℃, the size is 1620×1000×1560mm, and the weight is 900kg.

Application fields: Widely used in industrial cutting, welding, new energy battery processing, automobile manufacturing, photovoltaic processing, 3D printing, laser research and other fields.