Schneider Electric's Modicon TM3DQ32TK TM3 series I/O module

Schneider Electric's Modicon TM3DQ32TK is a digital output module in the Modicon TM3 series, mainly used with Modicon M221, M241, M251, and M262 logic controllers. Here is a detailed introduction:

Basic Information

Product Model: TM3DQ32TK.

Output Type: Source - type transistor output, which is PNP - type.

Number of Output Channels: 32.

Electrical Characteristics

Supply Voltage: 19 - 30V DC, with a nominal value of 24V DC.

Output Current: 100mA per channel.

Mechanical Characteristics

Dimensions: 90mm×30.2mm×70mm.

Mounting Method: It can be mounted on a symmetrical rail or panel.

Performance Characteristics

Protection Level: IP20.

Ambient Temperature: For horizontal installation, it is -10 - 55°C; for vertical installation, it is -10 - 35°C. The storage temperature is -25 - 70°C.

Humidity: 10% - 95% (without condensation during operation and storage).

Special Features

The "K" at the end of the module model indicates that the wiring method of this module is through an HE10 connector. The module is integrated with an HE10 interface and needs to be used with a pre - fabricated cable (one end is an HE10 connector connected to the I/O module, and the other end is a free - flying wire). The pre - fabricated cable models are TWDFCW30K (3 - meter length) and TWDFCW50K (5 - meter length). Since this module has 32 points, 2 pre - fabricated cables are required.