Allen-Bradley 2085-IF8 Micro850 series Plug-in PLC

Allen-Bradley 2085-IF8 is an analog input expansion module in the Micro850 series. Here is a detailed introduction:

Product Overview

Product Type: An expansion I/O module belonging to the Micro850 series, used to add analog input functions to the Micro850 controller.

Number of input points: 8 points.

Input type: Supports voltage and current input, the voltage range can be configured as 0-10V, ±10V, and the current range is 0-20mA.

Electrical parameters

Power supply: Get power from the I/O expansion bus of the Micro850 controller, the maximum bus current is 110mA at 5V DC, and 50mA at 24V DC.

Power consumption: The total power consumption during operation is 1.75W.

Functional characteristics

Resolution: 14 bits (13 data bits and 1 sign bit), the data format is left-aligned, 16-bit complement, and the conversion type is successive approximation register (SAR).

Input impedance: The voltage terminal input impedance is greater than 1MΩ, and the current terminal input impedance is less than 100Ω.

Overload capacity: The continuous overload capacity is 30V or 32mA, 1 channel at a time.

Terminal block: Each module contains two 12-pin removable terminal blocks (RTB) for easy wiring and maintenance.

Status indication: There is 1 green health indicator and 8 red error indicators to indicate the working status and fault information of the module.

Physical characteristics

Dimensions: 44.5mm×90mm×87mm.

Weight: 220g.

Installation requirements

Installation method: It can be installed on a DIN rail or panel mounted.

Installation environment: Electrostatic discharge needs to be avoided, and sufficient space should be left around during installation to ensure good air circulation and prevent overheating.