SICK sensor DGS80E-T02-2048PPR Intelligence Incremental encoders

SICK DGS80E-T02-2048PPR is an incremental encoder in the DGS80 series with the following features and application scenarios:

Features:

Resolution: The resolution of 2048PPR can measure the position and speed of the rotating shaft more accurately. By calculating the number of pulses, it can provide a more accurate feedback signal for the control system.

Electrical characteristics: Usually supports HTL or TTL output mode, which can be selected according to the specific application scenario and controller requirements. The power supply voltage range is generally 5V to 30V, which can adapt to a variety of power supply systems and is easy to integrate into various control systems.

Mechanical characteristics: It has two aperture versions of 30mm and 42mm, and can be flexibly installed with different mechanical apertures and mechanical parameters with the help of reducing rings and mounting springs. Equipped with universal mounting springs, the slotted mounting springs allow the installation position to be flexibly adjusted within 360° with a step of 15°. The clamping ring facilitates clamping and installation of the encoder shaft, without the need for special couplings or modifications to the motor shaft, and is easy to install.

Environmental adaptability: The enclosure protection level reaches IP65, which can effectively prevent dust and foreign objects from intruding, and can also withstand a certain degree of water spray. The operating temperature range is - 25°C to + 85°C, and it has strong shock and vibration resistance, and can work stably in harsh industrial environments and complex mechanical motion environments.

Application:

AC motor speed feedback: Provide speed feedback for the rotating motor shaft to help achieve accurate measurement and control of the AC motor speed.

Production machinery motion control: It can be applied to equipment such as steel rolling, metallurgical production line conveyor belts, mesh rollers, etc., to provide speed measurement feedback for the motion control of production machinery, so as to better control the production process.

Lifting equipment: In lifting equipment, providing speed feedback to the inverter for the motor-driven lifting mechanism helps to achieve accurate control of the lifting equipment.