Welcome to CW Green Tech Limited
info@cwlyautomation.com 86-136 6712 1125
Home      Products Delixi CDB6i C-type 2P 6A Miniature Circuit Breaker
Delixi CDB6i C-type 2P 6A Miniature Circuit Breaker

Delixi CDB6i C-type 2P 6A Miniature Circuit Breaker

  • Product Item : CDB6i C-type 2P 6A
  • Product Brand : Other
  • INQUIRY

Delixi CDB6i C type 2 pole 6A miniature circuit breaker is an electrical device for circuit protection with the following characteristics:

Technical parameters:

Rated voltage: suitable for AC circuits, the voltage can reach 400V AC.

Rated current: 6A.

Breaking capacity: usually 6kA, can quickly cut off the current when the circuit is short-circuited to ensure circuit safety.

Tripping characteristics: using C type tripping curve, generally tripping when the current reaches 5-10 times the rated current, suitable for protecting conventional loads and lighting circuits.

Rated frequency: 50Hz or 60Hz.

Insulation voltage: 500V.

Working temperature: the working environment temperature range is generally - 35℃~+70℃.

Mechanical life: up to 20,000 times.

Electrical life: up to 12,000 times.

Product function: With overload protection and short-circuit protection, it can automatically cut off the circuit when the circuit is overloaded or short-circuited, protecting the line and electrical equipment. At the same time, it can also be used to isolate the circuit, provide an obvious disconnection point during maintenance, and ensure the safety of the operator.

Product features: Bypass arc extinguishing technology is adopted, which can quickly start and extinguish the arc and extend the service life of the product. Equipped with a patented anti-blowout arc baffle to ensure the safety of the operator. A full range of energy storage components makes the switch more reliable for rapid separation and closing, and the product complies with CE, TUV, RoHS2.0 and other certification requirements.

Installation method: It can be easily installed on a standard 35mm DIN rail, supports upper incoming and lower outgoing lines, and is easy to install and connect.

Scope of application: Mainly used in circuits with AC 50Hz or 60Hz and a rated voltage not exceeding 400V. It is commonly used in power distribution systems in residential and commercial places, etc., and can provide circuit protection for lighting circuits and some low-power electrical equipment.