Welcome to CW Green Tech Limited
info@cwlyautomation.com 86-136 6712 1125
Home      Products Delixi CDB6i C-type 2P 10A Miniature Circuit Breaker
Delixi CDB6i C-type 2P 10A Miniature Circuit Breaker

Delixi CDB6i C-type 2P 10A Miniature Circuit Breaker

  • Product Item : CDB6i C-type 2P 10A
  • Product Brand : Other
  • INQUIRY

Delixi CDB6i C type 2-pole 10A miniature circuit breaker is a circuit protection device commonly used in low-voltage power distribution systems. The relevant introduction is as follows:

Technical parameters:

Rated voltage: 2P circuit breakers are usually suitable for 400V AC AC circuits.

Rated current: 10A.

Breaking capacity: Generally 6kA, it can quickly cut off the current when a short circuit occurs in the circuit to protect the circuit safety.

Tripping characteristics: Adopting C-type tripping curve, it trips when the current reaches 5-10 times the rated current, which is suitable for protecting conventional loads and lighting lines.

Rated frequency: 50Hz or 60Hz.

Insulation voltage: 500V.

Working temperature: The working environment temperature range is - 35℃~+70℃.

Mechanical life: up to 20,000 times.

Electrical life: up to 10,000 times.

Product function: It has overload protection and short-circuit protection functions. When an overload or short-circuit fault occurs in the circuit, it can automatically cut off the circuit to protect the line and electrical equipment. At the same time, it can be used to isolate the circuit and provide an obvious disconnection point during maintenance to ensure the safety of the operator.

Product features: Bypass arc extinguishing technology is adopted, which can quickly start and extinguish the arc and extend the service life of the product. Equipped with a patented anti-blowout arc baffle to ensure the safety of the operator. A full range of energy storage components makes the switch more reliable for rapid separation and closing, and the product meets the certification requirements of CE, TUV, RoHS2.0, etc.

Installation method: It can be installed on a standard 35mm DIN rail, supports upper incoming and lower outgoing lines, and is easy to install and connect.

Scope of application: It is mainly used in circuits with AC 50Hz or 60Hz and a rated voltage not exceeding 400V. It is commonly used in power distribution systems in residential and commercial places, etc., and can provide circuit protection for lighting circuits and some low-power electrical equipment.