SMC CXSM20 double cylinder Dual Rod Cylinder

SMC CXSM20 double-rod cylinder is a compact double-acting cylinder produced by SMC. It belongs to the CXS series with a cylinder diameter of 20mm and is suitable for automation scenarios such as pick and place. The following is a detailed introduction:

Features:

High guiding accuracy: The whole series is equipped with ball bushing bearings and sliding bearings as standard, with guiding function, high non-rotational accuracy, suitable for application scenarios such as pick and place.

Flexible installation: It can be installed from 3 directions, and the workpiece can be installed from 3 surfaces, which can meet various installation requirements.

Compact structure: The cylinder design is relatively compact, saving installation space, and is suitable for use in space-constrained environments.

Buffer design: With rubber buffer, and the buffer stroke has a certain adjustable range, which can reduce the impact at the end of the cylinder movement.

Technical parameters:

Action mode: double acting.

Applicable fluid: air (no lubrication).

Pressure resistance: 1.05MPa.

Maximum use pressure: 0.7MPa, the minimum use pressure is generally 0.05MPa.

Ambient temperature and working fluid temperature: -10℃ to 60℃ (no freezing).

Piston speed: 30 to 600mm/s.

Port size: M5×0.8.

Built-in magnetic ring: standard configuration, can be used with magnetic switch to detect cylinder position.

Stroke specifications: There are a variety of strokes to choose from, such as 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm, 70mm, 75mm, 80mm, 90mm, 100mm, etc., and longer strokes can be selected according to needs, up to 200mm.