SMC CXSM25 double cylinder Dual Rod Cylinder

SMC CXSM25 double-rod cylinder is a compact double-linked cylinder produced by SMC, belonging to the CXS series, with a cylinder diameter of 25mm. The following is a detailed introduction:

Features:

High guiding accuracy: standard ball bushing bearings and sliding bearings, with guiding function, suitable for pick-and-place applications, and non-rotational accuracy of up to ±0.1°.

Flexible installation: can be installed from 3 directions, and the workpiece can be installed from 3 surfaces, which can meet various installation requirements.

Compact structure: The cylinder design is relatively compact, saving installation space, and suitable for use in space-constrained environments.

Good synchronization of double rods: The synchronizer can ensure the synchronous movement of the two rods, reducing deviations and errors.

Technical parameters:

Action mode: double acting.

Applicable fluid: air (no lubrication).

Pressure resistance: 1.05MPa.

Maximum operating pressure: 0.7MPa, the minimum operating pressure is generally 0.05MPa or 0.1MPa (slightly different for different models).

Ambient temperature and working fluid temperature: -10℃ to 60℃ (no freezing).

Piston speed: usually 30 to 700mm/s, some models can reach 30 to 1000mm/s.

Port size: M5×0.8 or RC1/8.

Buffer form: Some models have air buffer, and the buffer stroke can be adjusted from 0 to - 5mm.

Built-in magnetic ring: The magnetic ring can be built-in, which is convenient for use with magnetic switches to realize the detection of cylinder position.