NOTIFIER JTY-GD-2151EIS FS2-3030 series fire alarm control panels

The NOTIFIER JTY-GD-2151EIS is an intrinsically safe smoke detector designed for use in hazardous environments. Here is a detailed introduction:

General Description

The JTY-GD-2151EIS is an intelligent, addressable smoke detector. It is intrinsically safe, which means it can be safely used in areas where there is a risk of explosion due to the presence of flammable gases or vapors. It complies with relevant explosion - proof standards, ensuring its reliability and safety in hazardous locations.

Features

Intrinsic Safety: It has been certified as intrinsically safe, with an explosion - proof mark of Ex ia IIC T5. This allows it to operate in explosive - gas - filled environments without the risk of ignition.

High Sensitivity: The detector is highly sensitive to smoke particles, enabling it to quickly detect the presence of smoke at an early stage. It uses advanced photoelectric sensing technology to accurately sense changes in the light scattering caused by smoke, providing reliable detection performance.

360 - Degree Visible Indicator: It is equipped with a 360 - degree visible indicator light. When the detector is in an alarm state, the indicator light will be clearly visible from all directions, making it easy for personnel to identify the alarm status at a glance.

Addressable Function: The detector is addressable, which means it can be individually identified and controlled within a fire - alarm system. This allows for precise location of the alarm source and easy integration with other components of the fire - alarm system.

Low Power Consumption: It features a low - power - consumption design, which helps to reduce energy consumption and prolong the service life of the power supply. This is especially important in applications where long - term operation is required.

Technical Specifications

Operating Temperature: - 10℃ to 55℃.

Operating Humidity: 10% - 95% relative humidity, non - condensing.

Power Supply: It requires a power supply within the range of 8.5 - 35 VDC, and must be powered through a safety barrier to ensure intrinsic safety.

Static Current: Typically around 60 μA.

Alarm Current: Approximately 130 mA (the specific value may vary depending on the connected controller).

Dimensions: The detector has a diameter of 51 mm (2.0 inches) and a height of 104 mm (4.1 inches) when installed on the appropriate base.

Weight: It weighs about 88 g (3.1 ounces).