NOTIFIER Intelligent Monitor Modules Fire Alarm Peripheral Devices

NOTIFIER's offers a variety of intelligent monitor modules for diverse applications. Monitor modules supervise a circuit of dry-contact input devices, such as conventional heat detectors and pull stations, or monitor and power a circuit of two-wire smoke detectors. Monitor modules model numbers include the FMM-1, FMM-101, FZM-1 and FDM-1.

Specifications

Temperature Range: 32°F to 120°F (0°C to 49°C)

Normal Operating Voltage: 15 to 32 VDC

FMM-1

Maximum Current Draw: 5.0 mA (LED on)

EOL Resistance: 47K Ohms

FMM-101

Average Operating Current: 375μA maximum (group poll); 350 μA (direct poll); 600 μA Max. (Communicating, IDC Shorted)

EOL resistance: 47K Ohms

FZM-1

Maximum Current Draw: 5.1 mA (LED on)

EOL Resistance: 3.9K Ohms

FDM-1

Maximum Current Draw: 6.4 mA (LED on)

EOL Resistance: 47K Ohm

Features & Benefits:  

Built-in type identification automatically identifies this device as a monitor module to the control panel

SEMS screws with clamping plates for ease of wiring

Direct-dial entry of address: 01 – 159

LED indication for normal or off normal indication

FMM-1 Monitor Module

Class A supervised wiring to the monitored device

FMM-101 Mini Monitor Module

Class B supervised wiring to the monitored device

Smaller size fits inside devices or junction boxes

FZM-1 Zone Interface Monitor Module

Transmits the status of one zone of 2-wire detectors to the fire alarm control panel

Status conditions are reported as normal, open, or alarm

FDM-1 Dual Monitor Module

Monitors two separate Class B circuits